Description
Directions
Initial Start-Up:
Before adding BioGuard Optimizer, bring a sample of the pool water or fill water to your local professional dealer to have the water tested and balanced to proper levels. Also, backwash or clean the filter before adding this product.
Then add 15 lb of BioGuard Optimizer per 15,000 gallons of pool water (1.5 per 1,000 gallons). Slowly add BioGuard Optimizer into your pool skimmer with the pump and circulation system on.
Allow pool water to circulate for 4-8 hours after application. Do not pour BioGuard Optimizer into a skimmer if circulation is not evident in the skimmer. Do not directly combine BioGuard Optimizer with any other product.
Routine Maintenance:
Test your pool water regularly for pH and sanitizer residual and adjust as necessary. Twice a year, bring a pool water sample to your BioGuard pool dealer for testing of your BioGuard Optimizer level and pool water balance.
NOTE: If the water level is significantly reduced or drained and refilled, then the water should be retested by your dealer. If your dealer determines that an additional BioGuard Optimizer is required, add amounts indicated by your dealer, following Initial Start-Up instructions for proper application.
